Industry
Exhibitions
Companys

FN7-12-Gas-Generating-Arc-Quenching-Technology-Principle-and-Advantages

05 09, 2026
Posted By: Peter

The evolution of distribution networks towards smart grids requires field devices that can seamlessly integrate remote control with local manual backups. The PGS-12/24/40.5/630-20 supports triple operation modes—Manual, Electric, and Remote (SCADA)—providing utilities with the flexibility to automate fault management while retaining manual override for emergencies or maintenance.

Manual operation is facilitated via a front-accessible handle using standard hot sticks. This mode is essential for initial commissioning, emergencies during power outages, or in networks without RTUs. The mechanism features a distinct, color-coded position indicator (Red=Closed, Green=Open) visible from the ground, ensuring safety for line crews .

Electric operation is handled by a motor drive integrated with the spring charging mechanism. Equipped with a 24V DC battery in the control cabinet, the PGS can perform more than 50 continuous open-close operations on a single charge . This is crucial for frequent switching of capacitor banks or automated user boundary protection (watchdog). The battery management system includes an automatic charger that activates when external AC power is present.

The core of smart grid readiness is the Remote (SCADA) mode. Utilizing an FTU (Feeder Terminal Unit) or RTU interface, the PGS communicates via standard protocols (RS485/Modbus) or optional GPRS/wireless modems . Operators can remotely monitor switch position, SF6 gas pressure, and battery status, and execute opening/closing commands from a control center. This feature, combined with the load break switch’s 400-cycle load switching endurance, enables fully automated fault location, isolation, and service restoration (FLISR) schemes.

Therefore, the PGS series is not merely a load break switch but a versatile actuator for modern smart grids, bridging the gap between legacy manual networks and advanced distribution automation systems. Putai also supports customization and the supply of related medium-voltage accessories to meet system integration needs.
(Article content references network resources.)

Main News
24 Jun, 2026
Why Pole Mounted Reclosers Are Essential in Modern Distribution Networks
As power distribution networks become more complex and customer expectations for uninterrupted electricity continue to rise, utilities face increasing pressure to improve reliability, reduce outage du
View More
22 Jun, 2026
ZW32 15 6kV Integrated Sensors Enable Precision Grid Monitoring and Protection
The ZW32-15.6kV Outdoor Pole Mounted Vacuum Auto Recloser incorporates advanced integrated sensor technology that provides the critical data needed for modern distribution automation. Equipped with th
View More
11 Jun, 2026
ZN63 VS1 12 Drawer Breaker Installation Commissioning and Maintenance Guide
Proper installation, commissioning, and maintenance of the ZN63(VS1)-12 Drawer-Type Vacuum Circuit Breaker are essential for ensuring long-term reliability and safety. Following established procedures
View More
Experts Provide Services For You!
More Related Products
LZZBJ15-12 12kV Current Transformer
  • Dual Windings:Supports both measuring and protection circuits.
  • Epoxy Insulated:Fully enclosed resin structure enhances durability.
  • High Insulation:Rated insulation level up to 12/28/75kV.
  • Standards Compliant:Meets IEC 60044-1 and IEC 61869-1/2.
  • Indoor Use:Designed for enclosed, medium-voltage switchgear.
  • Stable Operation:Provides long-term performance under normal conditions.
JDZ-12Q, JDZJ-12Q Semi-enclosed Voltage Transformer
  • Double-Pole Insulation:Enhanced electrical safety with epoxy resin casting.
  • High Reliability:Stable performance for voltage measurement and protection.
  • Low Core Magnetism:Reduces measurement errors.
  • Maintenance Free:Designed for long-term operation without regular servicing.
  • Wide Application:Suitable for single-phase and three-phase AC circuits.
  • Standards Compliance:Meets IEC 60044-2 & IEC 61869-1/3 standards.
LDZC-10 Phase-Sequence Through-Core Current Transformer
  • Through-Core Design:Primary bushing or cable passes through the core
  • Fully Enclosed:Secondary windings housed in flame-retardant plastic
  • Easy Installation:Bottom installation inserts for secure mounting
  • Secondary Current:Available in 5A and 1A
  • Voltage Withstand:Power frequency withstand voltage of 3kV
  • Standards Compliant:Meets IEC 60044-1 and IEC 61869-1 & 2
  • Indoor Use:Suitable for indoor medium voltage applications
JSZY18-24RJ Voltage Transformer
  • Epoxy Cast Body:Full encapsulation ensures insulation and durability
  • Elbow Plug Design:Enhances moisture protection and installation ease
  • Pollution Resistance:Performs well in dusty or humid environments
  • Voltage Rating:Compatible with systems up to 24kV
  • Standard Frequency:Designed for 50Hz or 60Hz operation
  • Indoor Application:Ideal for isolated neutral power systems
Inquiry Basket()
GET IN TOUCH NOW
Captcha Code
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All